Florida Mold Inspection Procedures Used By The Pro’s
Stop mold before it amplifies into a larger and more expensive problem then it already is using proven methods and solutions being used by professionals in the mold industry.
Mold is never an issue that should be taken lightly. What starts out as a small mold problem could very well turn into a dangerous issue where you may be forced out of your home due to the level of toxic mold are too extreme for you and your family to live in. Toxic mold can cause many disabilities for any person, especially children.
While most mold problems arise for a number of reasons. Their is a few procedures you will want to understand to prevent your mold problem from happening again and getting rid of the problem right away.
If your simply going to let the issue sit, be warned mold will only amplify faster and literally turn a simple mold problem into a $1,000 an hour problem.
By taking action today using one of the methods recommended below, you will avoid $1,000′s and be able to get your home in pristine condition.
Why You May Have Mold:
Well, moisture is a big cause of your mold problem. Either a leak happened, water seeped into the door, or the roof, tub, shower, water heater, or any other item is at fault. But how do know which is the problem?
Moisture Problems Arise From:
- A/C not being balanced and sweating
- A/C duct work being placed incorrectly
- Roof leak
- Water intruding into home
- Outdoor sprinklers hitting your wall consistently
- and many other
The Mold Inspection:
This is the 1st step the process. You must find out the source, this will prevent any future problems from coming back. I have seen so many times where mold sufferers pay someone to fix the problem, like a wet moldy carpet, but forget to solve the origin of the problem.
You will have a few options, when inspecting for mold.
2. Have a Mold Inspector Come Into Your Home
Regardless which you select, you will want to understand a bit of the process yourself. In most cases, you can find the source of your problem and save yourself $1,000′s of dollars from having a highly trained mold inspector come to your home and take air samples. This would be up to you and decided based on the extent of your mold problem.
Here are some helpful tips from the Mold Manuscript Inspection Procedures:
The Mold Manuscript helps professionals and people suffering with mold problems to go thru his 7 step course to not only inspect, but also remediate in an extremely affordable way. Below are the inspection tips given by Maurice himself to find your source of the mold problem.
Some Popular Problematic Locations:
- Perimeter Walls
- Doors
- Basements
- Ceilings
- Carpeting (Pickup Carpet & Check Tack Strips)
Look for the following in these locations:
- Water damage or Water stains
- Warping of building material (wood framing, etc)
- Funky musty odors
- Mold stains
Try to locate the source, for example… let’s say water stains. You need that if you see water stains around the window sill or around it, this simply means you may need caulking.
But… water seeps down, so you may need to investigate the area below.
As for carpeting… if you have a carpet adjacent adjacent to a door which allows water intrusion, you could be in a huge surprise when you pick up the carpeting. The tack strips may be rotted and full of mold. If they are… ask why? Most likely, water intrusion from the front door is your problem. These scenario’s are all explained and given in a unique way with the mold manuscript, so no situation is left unsolvable. Everything has a solution.
Every location is different, but once you understand the process, it’s not difficult to find the source of your mold problem.
Next… Is Your Mold Removal Procedures:
After location the source, we now can learn about correct mold remediation procedures. The method is not difficult and most mold sufferers have fixed their mold problem within anywhere from a day to 3 days understanding the correct mold remediation procedures.
You will have 2 options in doing a mold remediation:
2. Have Mold Remediation Expert Do It For You
To do it yourself, it can be more affordable and not difficult what so ever, due to new innovative products. Now since released to the public, products like Safe Shield and Molderizer are being used everywhere.
The natural mold remediation products are used by professionals because not only are that a green mold cleaner that kills mold. But the innovative formula that creates a barrier on building materials, which had mold previously are covered. This prevents any future mold amplification in the future. Which has never been done by any mold product out their.
Below Is The Process of Removing Mold:
Depending on the damage, sometimes just a simple spray down with Molderizer and Safe Shield should be fine for most mold problems. If the problem has spread, below is the procedure you would want to look into.
- Contain The Area
- Seal A/C Vents with Blue Tape
- Seal Doors Closed with Blue Tape
- Use 6MIL Clear Visqueen to contain the Area (Like the Movie E.T.)
- Remove All Wet Building Materials(Drywall, Carpeting, etc)
- Dispose Materials 5 ft from last visible trace
- Remove any wet carpeting 5 ft from last visible trace
- Dispose wet building materials in garbage bag (Seal with Tape)
- Clean Areas with Safe Mold Protectant and Natural Cleaners
- Clean with natural mold removal product on all exposed building materials
- Protect all building materials not removed with Mold Encapsulate
- Use the official mold cleaning kit to clean and protect
- Heppa Vac / Filter Mold Spores While Working In Room
- Filter out spores in the work area using Heppa Vac
These are some of the basics, the Mold Manuscript goes into more detail on easily getting rid of your own mold problem. The methods are outlines very clearly using Maurice’s 7 Step Procedure and practiced by mold professionals all over the United States.
Your Last Steps
Now that you’ve learned some of the steps and methods, you will want to make a decision to avoid any serious future amplification of mold.
Don’t let your mold problem slip away and cost you much more in the future.
Below is some alternatives to help you with your mold problem:
FIRST OPTION:
Use Natural Mold Removal Kit That Kills and Prevents Mold From Coming Back
SECOND OPTION:
Get A Quote From a Reputable Mold Professional
THIRD OPTION:
Learn the Correct Procedures Following The Mold Manuscript Course
{ 2 comments… read them below or add one }
We live in a building on the water in Miami Beach. Last year, there was water pouring down the wall in my daughter's room when it rained. I called maint., and they came & told us to simply keep the window shut tight. I asked if the stains on the wall were mold and was told "no". Over the next several months, my two daughters (ages 2 & 15 at the time) were constantly complaining of "tummy aches", head aches, fatigue, etc., Because we were told it wasn't mold, I was no longer even concerned about it and proceeded to remove foods and things I thought might be harmful. Nothing helped. My youngest daughter got worse and started having serious respiratory issues. We kept taking her to the doc where they had no idea why her breathing was "all of a sudden" terribly challenged.
After taking her to a specialist in The Bahamas (where my husband is from) where they still could not diagnose anything other than asthma, we decided to have the place tested for mold. I went to the business office & stated we were going to test for mold & got a copy of my original complaint a year prior. When the inspector tested the walls in my kids room, we were horrified when the results came back showing TWO types of mold that he said weren't even supposed to be indoors. Our building INSISTED on using their "in-house certified mold remover" and advised us to REMAIN in the apartment which we refused (they had to pay for us to stay in a hotel room and only did so for 24 hours. I came back to the place 4 hours after they began the work to find it completed.)
We assumed the mold was removed and came back. Prior to the removal, we never allowed our toddlers (now 2 and 3) to play in the room but once we were told the mold was gone, we allowed them to play in there. Within two weeks my son, who NEVER had breathing issues, was in the emergency room on a ventilator for 7 hours!!! I went back to the building and requested a "follow up" to make sure the mold was gone. They refused an air quality test but said they'd do a "moisture test".
We also found out yesterday that the property manager never rec'd the copy of the mold report that I sent her from the independent testing; meaning they didn't even know what type of mold they were working with. Nor did the "removers" use blue tape, masks, or a heppa vac.
We are now attempting to see what else can be done other than having the place re-tested. If the re-test comes back that there is still mold, do we have any recourse of action to take?
Definitely check out the link below for advice and guidance with mold steps and what to do next:
http://www.mold-removal.biz/index3.php